MOTUL MOTOCOOL COOLANT ANTIFREEZES FACTORY LINE
MOTUL MOTOCOOL FACTORY LINE is a racing cooling liquid, ready to use, based on monoethyleneglycol, using organic anti-corrosion additives (OAT – Organic Acid Technology) to provide an outstanding protection to aluminium/magnesium alloys used by bike manufacturers on new engines design. Cooling system optimal protection from freezing and metallic parts from corrosion. Specific anti-corrosion agents provides the best protection efficiency on aluminium/magnesium alloys – according to a dynamic corrosion test performed on a bike radiator, MOTOCOOL FACTORY LINE
divides by 3 the corrosion rate compared to a common organic coolant.
Provides an excellent thermal exchange and then engine cooling efficiency and prevents from boiling.
This organic OAT technology provides anti-corrosion properties that remain while high temperature and ageing. Low corrosion inhibitors consumption allows extended drain intervals. Water pumps protection, avoid cavitation.
Seals, rubber pipes and plastic parts friendly.
Red in colour
Density at 20°C/68°F ASTM D4052 1.070
pH ASTM D1287 8.5
Freezing protection ASTM D1177 -35°C / -31°F
Boiling point 136°C / 277°F (+1.5 bar)
Alkalinity reserve ASTM D1121 2.6 mg KOH/g